Table of Contents
Advertisement
Playback Effects
These effects allow you to be creative with the playback picture. You can use any one of the 4 effects.
PLAYBACK EFFECT
4
OFF
1
CLASSIC FILM
2
MONOTONE
B/W
3
SEPIA
4
STROBE
Play button
1
START PLAYBACK
Press the Play button (4).
2
ACCESS PLAYBACK EFFECT SELECT
MENU
Point the remote control at the camcorder's
remote sensor and press EFFECT. The
PLAYBACK EFFECT Select Menu appears.
3
SELECT PLAYBACK EFFECT
Move the pointer and highlight bar to the
desired effect by pressing EFFECT. The selected
function is activated and after 2 seconds the
menu disappears.
PLAYBACK EFFECT Select
Menu
Power Dial
Lock button
T
W
EFFECT
NOTES:
To deactivate the selected effect, press EFFECT
ON/OFF on the remote control. Pressing it again
re-activates the selected effect.
Repeat from step 2 when you want to change the
selected effect.
When "MONOTONE" or "SEPIA" is activated, the
"MULTI 4" and "MULTI 9" Snapshot modes
(
pg. 27) are not available.
The effects that can be used during playback are
Classic Film, Monotone, Sepia and Strobe . The
effects work the same in playback as they did in
recording. Refer to page 40 for more information.
EN
Remote sensor
PLAY
EFFECT ON/OFF
49
Advertisement
Table of Contents
