USING THE GRAPHIC EQUALIZER
The MT100II has a stereo 5-band graphic equalizer built in. As the block diagram below makes clear, signals assigned to the left
and right channels by the PAN control and level adjusted using the MASTER fader are sent to the equalizer.
used during ping-pong recording, mixdown operation and when recording with the REC SELECT control set to "L" or "R." The
equalizer cannot be used when the REC SELECT control is set to "1" — " 4," however, since each channel signal is recorded directly
on the appropriate track,
The graphic equalizer affects only the signal paths marked with bold lines in the diagram below.
18 MT100II MULTITRACK CASSETTE RECORDER
Therefore,
can be
it