Settings And Information - BMW 128i Owner's Manual

Settings and information

Operating principle
Certain settings and information can only be
made or called up when the ignition is switched
on. A number of settings cannot be made while
driving.
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information
3 When the lights are on: instrument lighting
brightness 78
4 Calling up Check Control
5 Checking oil level
6 Initializing the Flat Tire Monitor
Resetting the Tire Pressure Monitor
7 Setting the time 62
8 Setting the date 62
Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG
57
62
115
66
68
9 Viewing service requirement display
10 Setting formats and units of measure,
resetting to factory settings
11 Adjusting settings
> Confirmation signals when locking and
unlocking the vehicle
> Response during unlocking
procedure 19
> Automatic locking
> Pathway lighting
> Daytime running lights
> Triple turn signal activation
> Seat and mirror memory
Exiting displays
The outside temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
61
60
20
22
74
75
52
*
40
59