BMW 128i Owner's Manual page 144

1 2 Cause
Lights up in red:
Transmission overheating
Lights up in yellow:
Transmission too hot
Selector lever position P not engaged.
Vehicle not prevented from rolling
Selector lever position P not engaged.
Ignition cannot be switched off
Pinch protection system of the power
windows malfunctioning
Pinch protection system of the electric
glass roof malfunctioning
Cruise control system failed
Park Distance Control failed
> High-beam assistant inactive
>
High-beam assistant malfunction-
ing
>
Sensitivity of the high-beam assis-
tant has been changed
Bulb of exterior lighting system failed
Low-beam headlamp or fog lamp failed
High-beam headlamp failed
142
Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG
Special actions to be taken
Bring the car to a stop and move the
selector lever to position P. Allow the
transmission to cool down. You can
continue your journey, but moderate
your speed and exercise due caution.
Have the system checked if the situa-
tion reoccurs.
Avoid high engine loads. You can con-
tinue your journey, but moderate your
speed and exercise due caution.
Engage selector lever position P when
you wish to switch off the ignition, refer
to page 47.
Have the system checked.
Have the system checked.
You can continue your journey. Have
the system checked.
Have the system checked.
Clean the sensor field on the front of
the interior rearview mirror, refer to
page 77.
Have the system checked by your near-
est BMW center.
There is a risk that oncoming traffic
may be blinded. Have the system
checked by your nearest BMW center.
Have the exterior lighting checked as
soon as possible.
Have the low beams checked as soon
as possible.
Have the high-beam headlamps
checked.