Level Control Security Kit - Crown Macro-Tech 5002VZ Reference Manual

P.I.P.-PA permits the unique capability of adding one mic/
line input directly to each channel of an amplifier. With phan-
tom power for microphones, this mic/line input may be re-
motely switched from mic to line priorities.
P.I.P.-RPA A phantom-power mixer that has four balanced
mic or line inputs with voiceover capability and adjustable
For more information on these or other PIPs under development, contact your local dealer or Crown's Technical
Support Group.
8.2 Level Control Shaft Lock
A security accessory, the shaft lock can be used to se-
cure your amplifier's level controls in situations where
the front panel controls are subject to tampering. One is
Page 42
Fig. 8.4 Installing a Level Control Shaft Lock
Macro-Tech 5002VZ Power Amplifier
"duck" level, 84 dB of attenuation. A 10-volt DC source for
remote control capability is provided. The P.I.P.-EXT (Part
M44731-4), available from service, allows the P.I.P.-RPA and
other PIP cards to be "extended" outside the amplifier for
easy set up.
P.I.P.-RPAT has the same features as the P.I.P.-RPA but in-
cludes four input transformers.
P.I.P.-XOV is a versatile, economical mono 12- or 18-dB/
octave crossover/filter which offers bi-amping and tri-amping
capability.
needed for each channel. They can be ordered through
the Crown Service/Parts Department. For more informa-
tion, contact the Crown Service Department.
Reference Manual