Record Setting; Sensor Setting - Triplex T3200-DVR User Manual

Brightness/Contrast/Hue/Saturation: To adjust the image performance by setting
brightness, contrast, hue and saturation adjustment.
Video Loss: Set the Video Loss Alarm as Intermittent or Continues; alarmed by
Buzzer, Alarm Device, Both or Off.

3.3 Record Setting

In this item allows users to set record resolution, record speed, record quality, record
schedule and other recording parameters.
Resolution: The DVR offers two setting option in resolution as 320x224 and 640x224
Record Speed: The record speed could be changed for each channel with frame rate.
The higher the record rate, the more natural while playback. In this field, use LEFT
button to decrease record frame rate, and user RIGHT button to increase record
frame rate for each channel. If the record speed was set to be Off, there will be no
recording action on the channel.
Record Quality: Select the record quality as High, Normal or Low.
Event Rec Duration: Set the record duration from alarm was triggered in 5, 10, 15,
20, 25, 30 seconds.
Record Schedule: The Record Schedule is to set the scheduling record, the
numbers indicate the hour of a day from 00:00(12:00am) to 24:00(12:00pm). Use
RIGHT and LEFT button to move the cursor to indicate hour, and use ENTER button
to change the recording mode by color description on screen. Use ALL button, set the
whole day schedule at one time.
.

3.4 Sensor Setting

The sensor detection will beeped by buzzer on main PCB board or by relay of system,
to set buzzer or alarm device for your requirement in following features.
9