Advertisement
Operation
FEATURES AND CONTROLS
Figure 6 identifies the following key features and controls
on your machine:
(A) Collection Bag
(8) Engine Control Lever
(C) Engine Primer
(0) Air Cleaner
(E) Chipper Chute
(F) FuelTank
(G) Recoil Starter Rope
(H) Blower Deflector
(I) Safety Interlock Rod
(J) Vacuum Hose (optional)
(K) Baffle Plate (used with optional vacuum hose)
(L) Vacuum Inlet Cap
(M) Spark Plug
(N) Vacuum Height Adjustment Lever
DANGER
Rotating Cutting Blades Will Cause
Serious Personallnjuryl
Do not allow hands or any part of the body or clothing
inside the vacuum inlet, chipper chute, discharge
opening, or blower deflector opening when the
engine is running.
Before inspecting or servicing any part of the
machine, stop the engine and make sure that all
moving parts have come to a complete stop.
Disconnect the spark plug wire and secure it away
from the spark plug.
NOTE: The Shredder Screen is not shown in Figure 6.
Information on removing and installing the Shredder
Screen is found on Page 22.
Figure 6: Features and Controls.
10
Advertisement
