Arrakis Systems ARC-8 Technical Manual page 60

HOW TO CONNECT AND USE A CELL PHONE
The Bluetooth feature of the ARC series console allows you connect your cell
phone to the ARC series console. Thus, enabling you to take calls on your cell
phone and either put them on air, or play them on the Cue output. To do this:
1. Pair your cell phone to the Bluetooth ARC console using the steps
from the previous section. The red Drop LED will be lit if your cell
phone is connected.
2. Turn on the Bluetooth channel on your board. (CH 7 for the ARC-8,
CH 10 for the ARC- 10, CH 15 for the ARC-15)
3. Turn on the Bluetooth Channel to play out PGM out.
4. When a call comes in on your cell phone, you will notice that the
green Call LED will flash. Press the blue Call button to accept the
call. Press the blue Drop button to reject (clear) the call.
5. When you are finished with the call, press the blue Drop button to
end the call. You may also accept, reject or drop the call using your
cell phone.
IMPORTANT NOTE: When talking to the caller, you will be using the Mic channel
on the console (NOT your cell phone mic). When a Mic channel is on, then the
Monitor speakers will be muted, and you will only be able to hear the caller
through the Headphone output. You may also adjust the volume of your caller
on your phone, as well as on the console's Bluetooth channel.
IMPORTANT NOTE: When a call comes in to your cell phone, the ring will play
through the Bluetooth channel. For the best quality sound, we recommend to
leave the Bluetooth channel on the CUE output for when the call comes in. That
way the ring will not play over the air. You can then prepare the caller, and
when ready, switch the channel to PGM to put the caller on air.
B L U E T O O T H
7.4