Arrakis Systems ARC-8 Technical Manual page 19

Mono mic level Input Channels
Channels one and two are dedicated mono microphone channels.
CHANNEL ON AND OFF
To turn a channel on, simply push the red ON switch at the bottom of the fader. When the channel is on, the LED indicator above the
switch will light. To turn the channel off, simply push the red ON button again.
CHANNEL ON AND OFF LOGIC
Channels One and Two are assumed to be located in the control room and therefore do not require remote channel on/off logic.
TALK BUTTON ON CHANNEL ONE
This button activates a bi-directional off air talkback between mic one and the channel 7 phone input if an external hybrid is connect-
ed. The mic feeds the caller while the caller feeds the console cue system. The caller is heard on the monitor speakers and in the
headphones. The switch is a push-push interlocking type. Push once for on, push again for off.
Push to talk to the phone caller on chan-
nel seven (if an external phone hybrid is
used). The caller will be heard through
the cue system. Channel seven does not
need to be on.
Slide fader
Level control
On switch
O P E R A T I N G I N S T R U C T I O N S
Channel
(channels 1 & 2)
CHANNELS 1 & 2 ARE
MONO MIC LEVEL CHANNELS
3.2