Frigidaire Room Air Conditioner Use And Care Manual page 7

Operating! Instructions
Operating Instructions
(continued)
CHECK FILTER FEATURE, YOU WILL SEE:
hat
tool
■ energy stmr
fan only ■
mode
filter 1
reset]
temp/timer
V |
DO THIS:
PRESS FILTER
RESET BUTTON
heat
coot
finally
mode
filter
reset
Note: This feature Is a reminder to dean the Air Hiter (See Care and Cleaning) for more efficient operation. The LED (light) will
illuminate after 250 hours of operation. To reset after deaning the filter, press the "Filter Reset" button and the light will go off.
CLEAN AIR FEATURE(on some models):
YOU WILL SEE:
M I
la
sleep
fan
speed
tinier
clean
air
ON-
OFF
DO THIS:
PRESS
CLEAN AIR
BUTTON
Note: When this feature is "ON", the electronic air purifier is energized to remove pollen and impurities from the air. To cancel this
feature, press the Clean Air button (the LIGHT will turn off).
Note: This feature can be activated on the unit touch pad ONLY.
SLEEP FEATURE:
hi I
mtd
to
sleep
fen
speed
timer
clean
air
ON-
OFF
DO THIS:
' PRESS
SLEEP BUTTON
YOU WILL SEE:
Note: In this mode the selected temperature will increase by 2 °F 30 minutes after the mode is selected. The temperature will then
increase by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to
the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed.
The "Sleep" mode program can be cancelled at any time during operation by again pressing the "Sleep" button.
©2009 Electrolux Home Products, Inc.
All rights reserved.