Table of Contents
Advertisement
1.0 TECHNICAL SPECIFICATION and SERVICE HINTS
5.
Launch Windows Explorer and then quick format
the
new
drive
to
IMPORTANT: All music & content of your micro
jukebox will be erased once the device is
6.
Unzip and copy all the content of the shipment ui
files of the corresponding model version into the
root directory of the device. (CD ROM with the
Shipment ui files will be provided to repair
workshops.)
7.
Disconnect the GoGear from the computer by
clicking on the safely remove hardware
on the task tray.
8.
Wait until the display shows "Burn success".
9.
Reset the device again by pressing and holding
down the Volume + and the power on/off slider
switch until the display turns off.
10. Upgrade the firmware of the device to the latest
version by following the procedure as mentioned
under "Firmware software upgrades"
the
file
system
FAT32
formatted.
icon
Advertisement
Table of Contents
