Philips HDD6320/00/05 Service Manual page 3

1.0 TECHNICAL SPECIFICATION and SERVICE HINTS
is available and prompt user to download the
updated firmware.
downloading.
6. A status bar will show the downloading progress of
the firmware. Once the downloading is complete the
application will prompt you to install the update onto
your GoGear.
7. The application will show the status of updating and
at the end you need to click OK to complete the
update. (Please do not disconnect the jukebox
during the upgrading process as this interruption
Click YES to start
Click YES to confirm
may damage the firmware!)
the
8. Follow all screen instructions to complete the
firmware upgrade.
9. The Device Manager will close automatically once
the success message is displayed. Close all opened
application and then unplug your GoGear.
10. Once the GoGear micro jukebox is disconnected
from the computer, the display will show "Firmware
Upgrading" for a couple of seconds and then start up
as usual. If the message does not disappear after 2
minutes, do a soft reset by pressing and holding the
Power on/off key and the volume + key for a couple
of seconds.
Repair the firmware with Device
Manager
1. If you have not already installed the Device Manager
download the latest version of the Device Manager
from http://www.philips.com/support. You may need
to enter your language preference and the model
number
Device/Firmware Manager upgrade file.
2. Download the zip file into a temp folder in your
computer. Unzip the file and then double click the
Setup.exe file to start the installation of the Device
Manager.
3. Once the installation is complete, connect the
GoGear to the power supply with the AC/DC
adapter.
4. Make sure all other applications such as Philips
Device plug-in, Windows Media Player or Windows
Explorer that accessing the device are closed or
else Device Manager will not recognize the device.
Launch the Philips Device Manager at Start-
>Programs->Philips
Device Manager on your PC.
e.g.HDD1630, to
Device Manager->Philips
access the