Table of Contents
Advertisement
4
User manual
4.
Next page – Scrolls forward one page in the reading mode, if the flip effect is
activated.
5.
Status LED – A red light indicates that the device is just being loaded. The light
appears blue, as soon as the battery is fully loaded.
6.
micro-USB connection – Is used for exchanging data with a computer and loading
the integrated battery.
7.
microSD / microSDHC card slot – For inserting a microSD/microSDHC memory card.
8.
Volume control – To increase (+)/decrease (-) the volume.
9.
3.5 mm earphone jack
10. RESET – Pressing that button (preferably with an unfolded paperclip) performs a
reset. This may be necessary in rare cases when the Liro Color no longer responds
to other keystrokes.
11. Loud speaker
Turning on and off
If you want to switch on the Liro Color, hold the power button for aprrox. 3 seconds.
To switch off, press the button again for approx. 3 seconds and the shut down
menu opens. Here you have the choice to either switch the device off, to put it into
the standby mode or to cancel the process again. A short press onto the power
button turns the display off resp. on again (e. g. when the device is in the standby
mode).
After switching the device on it may take some time, until the operating system is
ready.
After the first start up, you will have to calibrate the screen. For the purpose of
recalibration, tap the laptop icon on the home screen or the options menu and
choose via Settings Touch Panel Calibration.
TrekStor Liro Color
Advertisement
Table of Contents
