Table of Contents
Advertisement
25
User manual
FAQ
The device is not responding or cannot be turned on
If the device is turned on and does not respond, please perform a reset. For that
press (preferably with an unfolded paper clip) the reset button at the bottom of the
device.
If the device will not turn on, the battery may be exhausted. Please charge the Liro
Color via USB on your computer (or via an USB adapter).
Battery life seems too short
The operating temperature is below 10
battery and is not a malfunction.
The battery was not used for prolonged period. Please recharge the battery of the
Liro Color.
The battery is not fully charged. Please load the Liro Color for at least 4 - 5 hours
and consider that the maximum battery life is reached after about 10 charge cycles.
The battery needs to be replaced. Please contact qualified personnel.
An eBook cannot be read
Copyrighted books can be read only by an authorized device. Make sure, for
example, when using Adobe® Digital Editions, that your device is registered
accordingly.
If this is a DRM copy-protected eBook, purchased on the internet, please make sure
that the eBook was fully transferred (downloaded) onto the Liro Color resp. check
that the eBook was fully synchronized via the computer with Adobe® Digital
Editions and with the Liro Color.
Check, whether the deadline has expired for the eBook. Make sure that the book
format is supported.
The device cannot be operated during USB connection
To use the Liro Color while charging, you can press the USB icon on the menu bar
and drag it down.
Tap now onto Disable USB storage and you can use the device as usual.
To transfer data between the computer and the Liro Color, the USB connection has
to be restored again.
When using an appropriate USB charger all your eBooks will be displayed without
any restrictions, so that the implementation of the above steps is not necessary.
o
C. This is due to the characteristics of the
TrekStor Liro Color
Advertisement
Table of Contents
