JVC GZ-HD7U Instructions Manual page 68

Changing the Menu Settings (Continued)
n
QUALITY
Enables you to set the picture
quality for videos.
@
ZOOM
Enables you to set the maximum
zoom ratio.
q
OIS
Compensates for hand shake.
p
GAIN UP
Makes the subject appear bright
automatically when you record in
dark places. However, the overall
color tones appear grayish.
o
WIND CUT
Reduces noise caused by wind.
/ REC MEDIA FOR VIDEO
Enables you to set the recording
medium for videos.
h
SCENE COUNTER
Enables you to set whether to
display the scene counter.
¦ EXTERNAL MIC LEVEL
Enables you to set whether
display the input level when the
external microphone (optional) is
connected.
68
Menus Settings: [ ] = Factory-preset
[FHD] : Record in 1920 x 1080i (full high-defi nition),
VBR (Variable Bit Rate). Select this to record in the
highest picture quality.
SP : Record in 1440 x 1080i (high-defi nition), VBR
(Variable Bit Rate). Select this in order to record for
a long time.
1440 CBR : Record in 1440 x 1080i (high-defi nition),
CBR (Constant Bit Rate). Select this to copy a
recorded video using the i.LINK connector.
NOTE
If you switch the quality settings, a new fi le management
folder is created in the HDD or SD card. If you change
the settings frequently, you may not be able to record due
to a limited quantity of folders. In this case, perform the
operation shown on page 79.
[10X] / 40X / 200X
NOTE
When the smallest value is set, the optical zoom is used.
When one of the larger values is set, the digital zoom is
used.
OFF : Disables the function.
[ON] : Activates the function.
NOTES
•
Accurate stabilization may not be possible if hand shake
is excessive, or depending on the shooting conditions.
•
Switch off this mode when recording with the camera on a
tripod.
OFF : Disables the function.
[ON] : Activates the function.
[OFF] : Disables the function.
ON : Activates the function.
[HDD] / SD
NOTE
When set to [SD], video picture quality will automatically be
set to [SP].
[OFF] : Disables the function.
ON : Activates the function.
OFF : Disables the function.
[ON] : Activates the function.