WATER DISPENSER MODEL: EWD-B7068(GR) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
IMPORTANT SAFEGUARDS When using this appliance, basic precautions should always be followed, including the following: 1. Read all instructions before using. 2. Never immerse the appliance in water or any other liquids, nor rinse it under the tap. 3. Do not operate the appliance with a damaged power cord or plug or after the appliance malfunctions, or it is dropped or damaged in any manner.
PRODUCT DESCRIPTION 1. Water tank latch 2. Water tank cover 3. Steam vent 4. Water level indicator 5. Control panel 6. Product body 7. Hot water dispensing lever 8. Warm water dispensing lever 9. Function selection knob (To boil or to dispense) 10.
REMOVE AND ATTACH THE WATER TANK COVER (Detach the water tank cover) 1. Open the hood, and hold the switch in joint. Clamp the switch and take out the hood. Caution: Be careful of the hot steam coming out from the steam vent. Note: Never remove the lid while the water is boiling.
HOW TO REFILL WATER 1. Before water is added or re-filled into the water tank, turn the function selection knob to left- “Boiling”. This step will segregate and prevent the non-boil water being transferred to warm tank directly. 2. If there is not enough water inside the hot tank (below the min water level), the water dispenser will not re-boil water.