Page 2
A.SAFETY INSTRUCTION H MACHINE INSTALLATION I. TECHNICAL PARAMETERS...
Page 3
A.SAFETY INSTRUCTION 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Page 4
YL1632S PART NAME PART NAME spout bottle supporter top cover water collector heating switch button of cold water cooling switch button of normal water power supply cord button of hot water power pilot lamp outlet of hot water condenser heating pilot lamp...
Page 5
YL1345S tap of normal water tap of hot water tap of cold water...
Page 7
D. OPERATION INSTRUCTION 5. This appliance should work under environment of temp from10 ~ 43 humidity≤90%. 6. This appliance is not suitable for installation in an area where a water jet could be used. 1. Keep this machine in place of dry and avoid direct sunshine. Rear of the machine should be no more than 25cm against from the wall.
Page 8
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Page 9
Turn on all the taps in turn for 3 minutes after the water outflow, which completes the internal pipeline flushing.
Page 10
H MACHINE INSTALLATION YL1635S-W / YL1345S...
YL1632S WARNING! To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions. I. TECHNICAL PARAMETERS POWER CAPACITY N.W. MEAS(mm) MODEL Hot water( 85 ) cold water( 10 ) Rated Power 4L/h 2L/h 11.2kg...