Special - Vision VN310SFHD Instruction Manual

6-8. SPECIAL

(1) CAM TITLE
If you enter a title, the title will appear on the monitor.
1. Please position the arrow to point to 'SPECIAL' on the
moving UP or DOWN direction.
2. Then, select 'ON' by using the LEFT and RIGHT selection.
When you press the button to complete 'ON', then 'CAM TITLE'
will be displayed.
☞ NOTE
· If 'OFF' is selected, the CAM TITLE does not appear on the monitor even if it has been input.
3. Up to 15 letters are available for the CAM TITLE.
① Please move the cursor to the letter to choose by
using the UP and DOWN selections.
② Set an ID from 0,1,~8,9, A,B, ~Y,Z by using the
UP, DOWN, LEFT and RIGHT selections.
③ Lock in the letters by using the button.
When the letter is locked in, the cursor moves to the next space.
④ Please repeat the above to input CAM TITLE.
4. When a name has been chosen, please select a position for the name to display.
① Please move the cursor onto 'POS' and then press the button.
② The name will appear at the top right corner.
③ Please find the position you wish to display the name by using the 4 directional
selections, and then press the button to finish.
5. Please select 'END' and then press the button to complete CAM TITLE input.
(2) D-EFFECT (Defect Compensation)
- FREEZE : You can view still or moving pictures.
- MIRROR : MIRROR/V-FLIP/ROATE
- D-ZOOM
PIP : ON/OFF
●
D-ZOOM : Adjust the x2.0 ~ x64.
●
PAN&TILT : Adjust the PAN&TILT
●
DEFAULT : Initialize all setting of the D-ZOOM.
●
RETURN : Returns to the D-EFFECT MENU.
●
- NEG. IMAGE : Negative ON/OFF
- RETURN : Returns to the SPECIAL MENU.
Version 1.0.0
Release Date: July. 04.2013
15