Setting Up The Menu - Vision VN310SFHD Instruction Manual

6-2. Setting up the menu

Settings can be made using the OSD Switch located on the back of the camera.
1. Press the button to access the SETUP mode. The SETUP menu is displayed on the monitor.
2. Please select any function you wish to activate by using the UP/DOWN selections.
The cursor can be moved up or down by using the UP/DOWN selections.
Position the cursor to point to the function you wish to operate.
* MAIN-menu : Use UP/ DOWN selections. / SUB-menu : Use LEFT/ RIGHT selection
3. Change the status of the selected feature using the LEFT/RIGHT selections.
When the LEFT or RIGHT selection is done, available values and modes are displayed in
order.
Please keep the selection until you get to the mode you wish to operate.
4. When completed, move the cursor indicator to 'EXIT' position and press the Button to finish
the setting.
☞ NOTE
If Appears at the mode you wish to operate, it means that there is a sub-menu which
can be selected by OSD Switch.
Version 1.0.0
Release Date: July. 04.2013
10