Specifications - Peavey Assisted Listening System User Manual

•
Frequency Response 100Hz – 15 KHz, +/- 3dB
•
Signal-to- Noise Ratio 60dB
•
Total Harmonic Distortion <0.5%
•
RF Carrier Frequency between 72-76 MHz
•
Frequency Stability +/- 0.005%
•
Modulation FM +/- 75KHz max
•
Operating Range Up to 300 ft. line of sight
TRANSMITTERS
•
Mic Input – Connector: ¼" phone jack, Impedance: low impedance, unbalanced, with 9V
DC at 1 mA for condenser mic.
•
Line Input – Connector: ¼" phone jack, Impedance: 100 K, unbalanced.
•
Power Output – 80,000 uV @ 3 meters.
•
Controls – Power ON/OFF, audio input gain adjust
•
Indicators – Power ON LED, Audio Modulation LED
•
Antenna – Permanently mounted telescoping whip
•
Power Requirement – 9V DC, regulated @ 200 mA, AC/DC adapter provided
•
Dimensions – 220 x 121 x 43mm
•
Weight – 19.5 oz (600g)
RECEIVER
•
Controls – Combination VOLUME/ON-OFF wheel
•
Audio Output – 250 mW max into 16 ohms
•
Connectors – 3.5mm mini jack for earphone output
•
Earphones – Mini binaural ear buds
•
Antenna – Integral with earphone cord
•
Indicators – LED power on indicator
•
Sensitivity – 2 uV for 12 dB Sinad with squelch defeated, Squelches at 10 uV for min. 50
dB S-N ratio
•
Mute Threshold – 8-10 uV
•
Power Requirement – (2) AA Batteries
•
Battery Life – 17-20 hours with alkaline battery
•
Dimensions – 110 x 60 x 20 mm
•
Weight 2.75 oz without batteries (80g)
Features and specifications are subject to change without notice.
Features and specifications are subject to change without notice.

SPECIFICATIONS

9
9