Playback Zoom - JVC GR-SXM770A Instructions Manual

Remote sensor
Zoom Buttons
SHIFT
Left Button
Right Button
Normal playback Press T

Playback Zoom

To magnify the recorded image up to 10X at any time
during playback.
NOTES:
Use the remote control unit to perform this procedure.
Make sure that the TBC mode is activated (
1
2
To move the image on screen around to find a particular
Up Button
portion of the picture . . .
.... while holding down SHIFT, press
Down
Button
To End Zoom . . .
PLAY
.... press and hold W until magnification returns to
PAUSE
STOP
NOTES:
Zoom can also be used during still playback.
Due to digital image processing, the quality of the image
may suffer.
After zooming in on a still video image, when normal
playback is started, the zoomed-in effect is momentarily
cancelled but then resumes, returning magnification to
the previously set level.
To move image,
press (Right)
while keeping
SHIFT held down.
Press PLAY to find the scene of interest.
Press the Zoom Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
(Up) and (Down).
normal. Or, press STOP and then press PLAY.
51
EN
pg. 23).
(Left), (Right),