Connection To A Windows Pc - JVC GR-SXM770A Instructions Manual

34
EN
Makes the DSC lamp come on.
Open the cover.
PC connection
cable
(provided)
NOTES:
Before transferring still images from your personal computer to the camcorder's built-in memory, perform the
camcorder's Picture Mode Setting (
computer in the selected Picture Mode.
When transferring still images from your personal computer to the camcorder, make sure the number of
images to be transferred is smaller than the camcorder's remaining number of shots available.
Use the AC Adapter as the power supply instead of the battery pack.
The still images stored in the camcorder's memory are not automatically removed after being transferred to
the PC. If you wish to remove those still images from the camcorder's memory, delete them (
Windows ® are trademarks of Microsoft Corporation, registered in the U.S.A. and other countries.
To DIGITAL
connector
®
For Windows :
To COM Port
(RS-232C)
pg. 16). The still images will be transferred from the personal
D.S.C. PLAYBACK
Connection To A Windows
Image data stored in the camcorder's built-in memory can
be transferred to a Windows
provided image transfer software, Picture Navigator. The
image data transferred to a Windows
further processed using Mr. Photo Gold.
To assure safety, make sure all units are turned off before
making any connection.
1
Connect the camcorder's DIGITAL connector to the
COM Port (RS-232C) on a Windows
provided PC connection cable.
2
Set the Power Switch to "
comes on. If the DSC Lamp is not lit, press REFRESH
for approx. 1 second to select "DSC". A still image
stored in memory appears.
•When transferring still images to a computer, be
sure that a still image is displayed on the screen.
3
Launch the provided software on your Windows
Transfer the still images stored in the camcorder's
memory to the Windows
instruction manual on the provided CD-ROM for
details.
•During transfer of the still image, the camcorder's
screen becomes blue and "
displayed. After transferring is finished, the screen
displays the same still image as in step 2.
4
Close the software, then switch off the camcorder.
(cont.)
®
PC
®
PC and saved using the
® PC can also be
® PC, using the
". The VIDEO Lamp
® PC. Refer to the software's
" is
pg. 33).
® PC.