Night-Alive - JVC GR-SXM536 Instructions Manual

36
EN
REFRESH Button
NIGHT-ALIVE Button
DSC Lamp
Power Switch
ADVANCED FEATURES

Night-Alive

Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is strobing
due to the slow shutter speed.
1
Set the Power Switch to "
REFRESH for approx. 1 second to select "VIDEO" (the
DSC Lamp goes out) or "DSC" (the DSC Lamp comes
on).
2
Press NIGHT-ALIVE repeatedly until the desired
mode's name and indication appear.
They are displayed for approx. 2 seconds, then the
name disappears so that only the indication remains.
The mode is activated.
3
To cancel the effect, press NIGHT-ALIVE repeatedly
until "OFF" appears. "OFF" is displayed for approx.
2 seconds.
A
NIGHT AUTO
The shutter speed is automatically adjusted
(maximum 1/5 sec.).
1
NIGHT 10X*
The shutter speed is set to 1/5th of a second to provide 10
times the sensitivity.
2
NIGHT 60X*
The shutter speed is set to 1 second to provide 60 times
the sensitivity.
*Appears when the Power Switch is set to "
NOTES:
During Night-Alive, the following functions or settings
cannot be activated:
• "Picture Stabilizer" (
Special Effects" (
( pg. 39).
• "S.LX" in CAMERA MENU (
Night-Alive does not work when LIGHT OFF/AUTO/
ON is set to "AUTO" or "ON" (
During Night-Alive, it may be difficult to bring the
camcorder into focus. To prevent this, use of a tripod is
recommended.
" or " ". Press
pg. 20), "Program AE With
pg. 38) and "Digital Effects"
pg. 41).
pg. 21).
".