Table of Contents
Advertisement
DIGITAL DISPLAY
Displays the current setting temperature
and malfunction code when the air
conditioner is in operation. When SELF
CLEAN feature is activated, it displays
, ,
,,
AUTO operation display
Displayed during Auto operation.
Special feature
CLEAN AIR function(optional)
Air quality is the key to comfort, this air
conditioner is equipped with Ionizer or
Plasma Dust Collector(Depending on models).
Ionizer can generate abundant anions to fill
the room with refreshing and nature air. Your
whole family will enjoy a natural, pure and
healthy air everyday. The Plasma Dust Collector
can generate an ionization zone. The air is
converted to plasma as it passes the high
voltage ion generator. 95% of the dust, smoke,
and pollen particles are attracted to the
electrostatic filter.
Follow Me function
The remote control serves as a remote
thermostat allowing for the precise
temperature control at its location.
To activate the Follow Me feature, point the
remote control towards the unit and press the
Follow Me button. T
he remote display is actual
temperature at its location. The remote control
will send this signal to the air conditioner every
3 minutes interval until press the Follow Me
button again.
If the unit does not receive the
Follow Me signal during any 7 minute interval,
the unit will beep to indicate the Follow Me
mode has ended.
Auto-Restart function
When the power is off and then on,
the unit automatically restores the
previous function setting.
OPERATING INSTRUCTIONS
TIMER display
Displayed during Timer operation.
.
CLEAN AIR display
Displayed when CLEAN AIR
feature is activated.
SELF CLEAN function(optional)
Function used after the Shut Down
of cooling operation to clean the
Evaporator and keep it as fresh for
the next operation.
This function is easy to be operated
as it is accessed through the
Remote Controller.
Note:
This function is only available
under COOL(AUTO COOL,
FORCED COOL)and DRY mode.
Before select the function, it is
recommended to run the air condi-
tioner under Cooling operation for
about half an hour.
Once the Self Clean function is
activated, all TIMER setting will be
cancelled.
During Self Clean operation, when
press the SELF CLEAN button on the
remote controller again will stop the
operation and turn off the unit.
Dry & Antibacterial Function(optional)
When turns off the unit on COOL, DRY,
AUTO (Cool) mode, the air conditioner
will continue operating for 7 minutes
at soft fan speed. This will help to dry
up the water (sweating) inside the
evaporator, and prevent bacterial from
multiplying, supply clean and fresh air.
This function is a factory default setting.
If you want to cancel it, use the remote
controller to select the FAN mode,
press the ON/OFF button to turn on the
unit, press the ON/OFF button again
to turn off the unit after 5 seconds.
Under DRY & Antibacterial mode, do
not restart the air conditioner until the
unit is completely off.
6
(optional)
Advertisement
Table of Contents
