Setting Up And Using The Monitor; Attaching The Monitor Stand Base - HP EliteDisplay S240ml User Manual

2

Setting up and using the monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, and then follow the instructions below.
CAUTION:
cause damage.

Attaching the monitor stand base

1. Remove the monitor with attached stand from its box and lay it on a flat surface covered by a
clean, dry cloth.
2. Remove the cover from the base.
3. Attach the stand base to the stand by tilting the stand base to engage the two tabs on the bottom
of the stand riser with the slots in the stand base (1).
The screen is fragile. Avoid touching or applying pressure to the screen; doing so can
Attaching the monitor stand base 3