Make Connections - JVC GR-SX210A Instructions Manual

Open the cover.
To Video
To J
output
terminal
and Audio
(JLIP)
output
connectors
Audio/Video
(A/V) cable
(provided)
Editing cable*
To Remote
PAUSE
To PAUSE-IN
RM-V700U
RM-V716U
OR
(optional)
(provided with
GR-SXM460A/
SXM46EA only)
* Provided with GR-SXM460A/SXM46EA only.

MAKE CONNECTIONS

1
Open the
cover.
To S-Video
output
connector
2
3
S-Video cable
(provided)
NOTE:
If your VCR has an S-Video input connector or a SCART
connector compatible with Y/C signals, connect the
To AUDIO
camcorder and the VCR using the provided S-Video cable.
(L/MONO),
VIDEO and
This can improve the dubbed picture quality.
S-VIDEO IN
connectors
VCR
TV
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
VCR OTHER THAN TYPE
Connect the editing cable to the RM-V716U/RM-
V700U's PAUSE-IN connector.
Insert a recorded tape into the camcorder and set the
Power Switch to "PLAY".
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's
instructions).
CONTINUED ON NEXT PAGE.
45
EN
OR