Honda GCV135 Problem Solving And Maintenance Manual page 24

Engine Model: Honda GCV135
or become detached (see a service
dealer).
B REPLACING THE BELT
To replace the belt on these machines, it will
involve tipping the machine to gain access to the
belt. You will need to observe certain general and
safety precautions prior to undertaking this task.
Chose an appropriate firm surface to work on such
as a workbench - not standing on a high quality
patio or lawn (these could be stained or damaged
by machine fluids).
WARNING: Make sure you have disconnected the
HT lead (spark plug cap) from the spark plug (it is
a simple push fit) before you undertake ANY of the
work below.
The air filter cover and filter paper element will
need also to be removed.
located on the front left hand side (viewed from the
rear) and secured with two clips on the top. Press
these down and the air filter cover will fall open.
Now follow the sequence of steps below:
1. Remove the grassbox
2. Check you have already removed the spark
plug cap (for safety reasons) and the air filter
(to avoid potential contamination)
3. Without tipping the mower forwards or
sideways, lift the mower up onto a workbench
on all 4 wheels, and position the back wheels
close to the edge of the workbench
Page 24 of 32
and
Honda GCV160
The paper air filter is
Honda Engines Selfhelp
Find your local
ServiceLink centre at
www.servicelink.org.uk
Guide 2011, Issue 1.0