Table of Contents
Advertisement
Tracking
Eliminates noise bars that appear on-screen during
playback. To activate Manual Tracking:
1) Press the TRACKING Wheel
i
2 seconds. "MT"
2) Rotate the TRACKING Wheel
noise bars disappear.
• To return to Auto Tracking, press the TRACKING
1
Wheel
@
for approx. 2 seconds or set the Power
Switch
to "OFF" and then "
blinks. When Auto Tracking finishes, the indication
disappears.
• When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and
i
"AT"
appears.
• Manual Tracking may not work with tapes
recorded on other VCRs or camcorders.
TBC (Time Base Corrector)
Removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes.
To activate/release the TBC mode, press TBC
during playback for more than 1 second. When the
TBC mode is activated, "TBC"
• The "TBC" indicator
camcorder equipped with a black/white
viewfinder) while TBC is working, and white while
TBC is not operative.
• TBC does not work during Still Playback and
Shuttle Search (
• It may take a few seconds before TBC actually
starts working.
• The picture may be distorted if the TBC mode is
activated or deactivated at the edit-in/-out points
or when normal playback resumes after Still
Playback or Shuttle Search (
• If the playback picture is distorted when TBC is
set to on, turn off TBC.
1
for approx.
1
appears.
so that the
" again. "AT"
w
w
is displayed.
turns green (grey with a
pg. 11).
pg. 11).
Counter Memory
Makes it easier to locate a specific tape segment.
1) Press COUNTER R/M
1 second. The counter
2) Press COUNTER R/M
"M" appears.
3) After recording or playback, press 5
%
. The tape automatically stops at or close
2
i
to 0:00:00.
4) Press 4/6
• The counter memory functions in the Fast-
Forward and Rewind modes.
• To disable the counter memory function, press
COUNTER R/M
"M" disappears.
Playback Special Effects
SXM48EA/SXM780A/SXM480A/SXM280A only)
Allows you to add creative effects to the playback
image. (
pg. 23, "Digital Effects")
1) Activate "TBC" and Auto "Tracking".
4
2) Press DIGIFECT
e
mode
appears.
• To cancel the effect, select "OFF".
• NEGA POSI, MOSAIC and STRETCH are not
available.
• Playback Special Effects do not work during
Shuttle Search (
• The selected effect mode cannot be changed
during Still Playback (
14
)
t
and hold for more than
)
resets to "0:00:00".
for less than 1 second.
^
to start playback.
)
for less than 1 second so that
w
repeatedly until the desired
pg. 11).
pg. 11).
$
, then
(GR-SXM78EA/
Hide quick links:
Advertisement
Table of Contents
