JVC GR-FXM373 Instructions Manual page 26

26
EN
NOTE:
Before performing the following steps, make
sure that:
The Power Switch is set to "
The camcorder is in the Record-Standby
mode.
The recording mode is set to "SP".
Recording Start/Stop Button
Display
REC T I ME
O F F
1 / 4 S
1 / 2 S
1 S
5 S
I NT . T I ME
O F F
1 5 S
3 0 S
1 M I N
5 M I N
1 5 S
1 S
NOTES (for Animation and Time-Lapse):
For best results, make sure the camcorder is secured when shooting in Animation or Time-Lapse mode.
Fade- or wipe-in/out cannot be performed during Animation or Time-Lapse shooting.
Before performing other operations following Animation or Time-Lapse recording, make sure the Animation
or Time-Lapse mode is deactivated.
Animation and Time-Lapse are canceled when the power is shut off or when the cassette is ejected.
RECORDING
Animation
You can shoot a series of pictures, each slightly different,
of the same object for a brief period of time.
".
1
2
3
MENU Wheel
4
5
REC TIME Menu
Time-Lapse
You can record sequentially at preset time spans. Leaving
INT. TIME Menu
the camcorder aimed at a specific subject, you can record
subtle changes over an extended period of time.
1
2
Interval time
indicator
3
Recording time
indicator
4
Advanced Features (cont.)
Press MENU. The Menu Screen appears.
Rotate MENU to select " TO SYSTEM MENU" and
press it to display SYSTEM MENU. Rotate MENU to
select " NEXT" and press it to display the next page.
Then, rotate MENU to select "REC TIME" and press it.
The REC TIME Menu appears. Rotate MENU to select
the desired recording time, then press it.
The Menu Screen reappears with the highlight bar on
" RETURN". Press MENU again to close the Menu
Screen.
Press the Recording Start/Stop Button after focusing
on the subject. The recording stops automatically
after the selected period of time.
•Repeat step 4 for the desired number of pictures.
To release the Animation mode, set "REC TIME" in
the Menu screen to "OFF".
Set "REC TIME" ( step 1 and 2 of "Animation"
above).
Rotate MENU to select "INT. TIME" and press it. The
INT. TIME Menu appears. Rotate MENU to select the
desired interval time, then press it. The Menu Screen
reappears with the highlight bar on " RETURN".
Press MENU again to close the Menu Screen.
Press the Recording Start/Stop Button. Recording and
intervals alternate automatically.
To release the Time-Lapse mode, when "
displayed, press the Recording Start/Stop Button to
display " ", then set "REC TIME" and
"INT. TIME" in the Menu Screen to "OFF".
" is not