JVC GR-FXM333 Instructions Manual page 24

24
EN
Select Dial
Display
FOCUS AUTO
EXPOSURE AUTO
WIDE OFF
S.LX OFF
TITLE
DATE TIME DISP.
4
RETURN
DATE TIME DISP.
AUTO DATE
DATE
TIME
DATE&TIME
OFF
EXIT
FOCUS AUTO
EXPOSURE AUTO
WIDE OFF
S.LX OFF
TITLE
DATE TIME DISP.
4
RETURN
25. 12. 99
AUTO DATE
25 . 12 . 99
(DATE)
22 : 50 : 00
(TIME)
25 . 12 . 99
(DATE&TIME)
OFF
(No indication)
Power Switch
Menu Screen
DATE/TIME DISP.
Menu
22 : 50 : 00
RECORDING
Date/Time Insert
The feature allows you to display the date and time on the
LCD monitor, in the viewfinder, or on a connected colour
monitor, as well as to record them manually or automati-
cally.
1
SELECT OPERATION MODE
Set the Power Switch to "PRO.".
2
ACCESS MENU SCREEN
Press the Select Dial to display the Menu Screen.
3
ACCESS "DATE/TIME DISP." MENU
Move the highlight bar to "DATE/TIME DISP." by
rotating the Select Dial while in Record-Standby.
Then press it to display the DATE/TIME DISP. Menu.
4
SELECT THE DESIRED MODE
Move the highlight bar to the desired mode by
rotating the Select Dial, then press it. The desired
mode is activated.
•You should have already performed the Date/Time
Setting procedure (
first.
5
CLOSE MENU SCREEN
The Menu Screen reappears with the highlight bar on
"RETURN". Then press the Select Dial to close the
Menu Screen.
NOTES:
DISPLAY
The selected display can be recorded.
If you do not want to record the display, select the OFF
mode before shooting.
AUTO DATE
Your camcorder automatically records the date for about
5 seconds after recording is initiated in the following
situations:
• After changing the date.
• After loading a cassette.
• After Auto Date Record mode is selected by rotating
the Select Dial.
In this mode, the date is replaced after 5 seconds with
"AUTO DATE" but this is not recorded.
Advanced Features (cont.)
pg. 7). If you haven't, do so