Specifications; Amplifier Section; Tuner Section; Video Section - Onkyo TX-SR501/E Service Manual

Specifications

AMPLIFIER SECTION

Continuous Average Power output (FTC)
All channels:
Continuous Power output (DIN)
Maximum Power output (EIAJ)
Dynamic power output:
Total Harmonic Distortion:
IM Distortion:
Damping Factor:
Input Sensitivity and Impedance
DIGITAL INPUT (OPTICAL 1, 2):
DIGITAL INPUT (COAXIAL):
LINE (CD, VIDEO 1, 2, 3, TAPE):
Multichannel Input
(DVD FRONT L/C/R, SURR L/R):
(SUBWOOFER):
Output Level and Impedance
Rec out (TAPE, VIDEO 1):
Pre out (SUBWOOFER):
Frequency Response:
Tone Control
Bass:
Treble:
Signal-to-Noise Ratio:
Muting:

VIDEO SECTION

Input Sensitivity and Impedance
VIDEO (DVD, VIDEO 1, 2, 3):
S VIDEO (DVD, VIDEO 1, 2, 3):
COMPONENT VIDEO 1, 2:
Output Level and Impedance
VIDEO (VIDEO 1, 2, MONITOR):
S VIDEO (VIDEO 1, 2, MONITOR):
COMPONENT VIDEO OUT:
65 watts per channel min. RMS at
8 Ω, 2 channels driven from 20 Hz
to 20 kHz with no more than 0.08%
total harmonic distortion.
80 watts per channel min. RMS at
6 Ω, 2 channels driven from 1 kHz
with no more than 0.1% total har-
monic distortion.
×
2 at 6 Ω
85 watts
×
2 at 6 Ω
115 watts
×
2 at 3 Ω
160 watts
×
2 at 4 Ω
125 watts
×
2 at 8 Ω
85 watts
0.08% at rated power
0.08% at 1 watt output
0.08% at rated power
0.08% at 1 watt output
60 at 8 Ω
0.5 Vp-p, 75 Ω
0.5 Vp-p, 75 Ω
200 mV, 47 kΩ
200 mV, 47 kΩ
36 mV, 47 kΩ
200 mV, 470 Ω
1 V, 470 Ω
10 Hz to 100 kHz,
+1/–3 dB (Direct mode)
±12 dB at 50 Hz
±12 dB at 20 kHz
CD/TAPE: 100 dB
(IHF-A, Direct mode)
–50 dB
1 Vp-p, 75 Ω
1 Vp-p, 75 Ω (Y)
0.28 Vp-p, 75 Ω (C)
1 Vp-p, 75 Ω (Y)
0.7 Vp-p, 75 Ω (P
, P )
B R
1 Vp-p, 75 Ω
1 Vp-p, 75 Ω (Y)
0.28 Vp-p, 75 Ω (C)
1 Vp-p, 75 Ω (Y)
0.7 Vp-p, 75 Ω (P
, P )
B R

TUNER SECTION

FM
Tuning Range
North American models:
Other models:
Usable Sensitivity
Mono:
Stereo:
50 dB Quieting Sensitivity
Mono:
Stereo:
Capture Ratio:
Image Rejection Ratio
North American models:
Other models:
IF Rejection Ratio:
Signal-to-Noise Ratio
Mono:
Stereo:
Alternate Channel Attenuation:
Selectivity:
AM Suppression Ratio:
Total Harmonic Distortion
Mono:
Stereo:
Frequency Response:
Stereo Separation:
AM
Tuning Range
North American models:
European & Australian models:
Worldwide models:
Usable Sensitivity:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Total Harmonic Distortion:
GENERAL
Power Supply and Power Consumption:
AC 120 V, 60 Hz
AC 230-240 V, 50 Hz
AC 220-230 V and 120 V switchable, 50/60 Hz
× ×
Dimensions (W H D):
Weight
North American models:
European models:
Other models:

REMOTE CONTROL

Transmitter:
Signal range:
Power supply:
Specifications and features are subject to change without notice. Power sup-
ply and voltage vary depending on the area in which the unit is purchased.
Page 2
87.50-108.00 MHz (100 kHz steps)
87.50-108.00 MHz (50 kHz steps)
11.2 dBf, 1.0 µV (75 Ω, IHF)
0.9 µV (75 Ω, DIN)
17.2 dBf, 2.0 µV (75 Ω, IHF)
23 µV (75 Ω DIN)
17.2 dBf, 2.0 µV (75 Ω)
37.2 dBf, 20.0 µV (75 Ω)
2.0 dB
40 dB
85 dB
90 dB
76 dB
70 dB
55 dB
50 dB (DIN)
50 dB
0.2%
0.3%
30 Hz-15 kHz, –1.0 dB
45 dB at 1 kHz
30 dB at 100 Hz-10 kHz
530-1,710 kHz (10 kHz steps)
522-1,611 kHz (9 kHz steps)
522-1,611 kHz (9 kHz steps), or
530-1,710 kHz (10 kHz steps)
30 µV
40 dB
40 dB
40 dB
0.7%
4.6 A
370 W
370 W
× ×
17-1/8" 5-7/8" 14-13/16"
× ×
435 150 376 mm
19.6 lbs., 8.9 kg
21.6 lbs., 9.8 kg
21.8 lbs., 9.9 kg
Infrared
Approx. 16 ft., 5 meters
×
Two "AA" batteries (1.5 V 2)
TX-SR501/E