Loading/Unloading A Memory Card - JVC GR-DZ7 Instructions Manual

GETTING STARTED
16
EN

Loading/Unloading A Memory Card

The provided memory card is already inserted in the
camcorder at the time of purchase.
Card Cover (MEMORY CARD)
Memory card
Write/erase
protection tab
1
Make sure the camcorder's power is off.
2
Open the card cover (MEMORY CARD).
3
To load a memory card, firmly insert it with its
clipped edge first. Slide the memory card lock switch to
the lock position.
To unload a memory card, slide the memory card lock
switch to the unlock position, then push it once. After the
memory card comes out of the camcorder, pull it out.
Do not touch the terminal on the reverse side of the label.
4
Close the card cover.
To protect valuable files (available only for SD
Memory Card)
Slide the write/erase protection tab on the side of the
memory card in the direction of "LOCK". This prevents
the memory card from being recorded over. To record on
this memory card, slide the tab back to the position
opposite to "LOCK" before loading it.
NOTES:
Some brands of memory cards are not compatible with this
camcorder. Before purchasing a memory card, consult its
manufacturer or dealer.
Before using a new memory card, it is necessary to format
the card. ( pg. 28)
ATTENTION:
Do not insert or remove the memory card while the
camcorder is turned on, as this may cause the memory card
to be corrupted or cause the camcorder to become unable to
recognize whether or not the card is installed.
Clipped edge
Label Memory card
lock switch