Using A Replacement Sheet Holder Set - Casio STC-U10 User Manual

Using a Replacement Sheet Holder Set

Use the procedure below when you want to replace your current stamp base with a
different one.
You can replace the stamp base without removing the cap.
1.
Remove the current stamp base.
Remove the current stamp base (with cap attached) from your stamp.
2.
Attach a new stamp base.
Attach a new separately available stamp base (with cover attached) to the grip.
Cap
Stamp base
Grip
With the components oriented in
accordance with the arrows, turn
over the stamp base.
42
Slide the stamp base (with cap
attached) to the side to remove it.
Bottom of stamp base