Precautions During Use - Casio STC-U10 User Manual

Precautions during Use

To ensure that your Printer provides you with the many years of operation for which
it is designed, be sure to note the important precautions described below.
• Do not use the Printer in any location where any of the following is present: exposure to
direct sunlight, high humidity, static electric charge, extreme temperature fl uctuations,
temperature extremes.
• The operating temperature range of this Printer is: 10°C to 35°C (50°F to 95°F).
• Do not subject the Printer to strong shock or force.
• Do not allow paper clips, pins, or other metal objects to get into the sheet holder inlet
slot or outlet slot.
• Do to apply excessive bending force to the sheet holder and do not try to forcible push
it into the Printer.
• Printing will become unclear if the print head is dirty. If this happens, clean the print
head and the rubber roller as described under "User Maintenance" (page 44).
● Kit Precautions
• See page 30 of this manual for information about how to insert the sheet holder into
the Printer.
• Pressing the ink container nozzle tip against and scratching the nozzle tip against the
stamp sheet with strong force can damage the sheet.
• Do not try to take a stamp apart.
• Keep stamp kits out of the reach of small children.
• Store stamp kits in a location away from heat, humidity, and direct sunlight.
● Ink Precautions
• Use only the special separately available ink specifi ed for use with this product. Never
use any other type of ink.
• Never put the ink bottle or its cap in your mouth. Doing so creates a choking risk.
• Should ink ever get into your mouth or eyes, immediately rinse with large amounts of
water.
• Should ink ever get onto your skin, immediately wash the affected area with soap and
water.
• You may not be able to remove ink if it gets onto your clothing or other items.
• Removing the ink bottle cap while squeezing the bottle can cause ink to suddenly eject
out of it.
• Keep ink out of the reach of small children.
• Be sure to replace the cap onto the bottle after you are fi nished using ink. Store ink in a
location that is not subjected to heat, high humidity, or direct sunlight.
9