Removing The Computer From The Keyboard Cover; Using The Keyboard - Acer ICONIA W7 Quick Manual

4. Place the holder into the keyboard's channel to put the computer in position.
Note: To avoid possible damage, do not carry the holder with the
computer facing outside.

Removing the computer from the keyboard cover

1. Peel back the molding at tablet holder's top corners simultaneously.
2. Continue peeling the top end of the tablet holder's molding back until the top
of tablet is uncovered.
3. Grab the top of the tablet and pull it out of the holder.

Using the keyboard

Your Bluetooth keyboard comes pre-paired with the ICONIA W7. You only
need to turn on the keyboard and the ICONIA W7 Bluetooth function by doing
the following:
1. Tap the Settings charm > Change PC settings > Wireless.
2. Under Wireless devices, ensure the Bluetooth switch is set to On.
3. Press and hold the keyboard's Power button until the function LED comes
on (the function LED will turn on for 5 seconds and then turn off).
4. To turn off the keyboard, press and hold the keyboard's Power button until
the function LED blinks. Release the Power button.
11