Advertisement
Getting started
Using your computer for the first
time
1. Plug in before turning on for the first
time.
2. Press and hold the power button until
you see the Acer logo.
3. Before initial setup, retotate the tablet to
Protrait mode.
4. Then follow the onscreen instructions to
complete setup.
Connecting to the Internet via Wi-Fi
To connect to a Wi-Fi network tap Settings,
then under Network & internet tap Wi-Fi and
ensure it is On. Tap the name of your wireless
network; if necessary enter a security
password to access the network.
Connecting a Bluetooth device
To connect to a Bluetooth device tap
Settings, then under Connected devices tap
Bluetooth and ensure it is On. Your device
automatically scans for available Bluetooth
devices; tap an available device to connect.
Note: A2DP stereo headsets are supported
for playback only. Please check for updates
to the tablet's software that may add
support for additional Bluetooth devices.
Restoring to factory settings
To format your tablet tap Settings, then tap
System > Reset options > Erase all data
(factory reset); tap RESET TABLET and
then ERASE EVERYTHING.
Your User's Manual and Safety
Guide
The User's Manual and the Safety Guide can
be downloaded from the Acer support
website by going to:
http://go.acer.com/?id=17883
Note: The information of the Safety Guide
may vary by product or region.
Updating the operating system
To check for updates tap Settings, then tap
System > About tablet > System updates
> CHECK NOW.
This manual contains proprietary information that is
protected by copyright laws. The information
contained in this manual is subject to change without
notice. Some features described in this manual may
not be supported depending on the Operating
System version. Images provided herein are for
reference only and may contain information or
features that do not apply to your computer. Acer
Group shall not be liable for technical or editorial
errors or omissions contained in this manual.
Advertisement
