JVC GR-DVX2 Instructions Manual page 64

64
EN
Adjustment of VCR's against Camcorder Timing
VCR (Recording deck)
48kHz MODE
32kHz MODE
SYNCHRO
4
DISPLAY
TIMECODE
END
Playback Menu
4
ACCESS PLAYBACK MENU
Point the remote control at the Docking
Station's remote sensor and press R.A. EDIT
ON/OFF to make the Random Assemble
Editing menu disappear, then press MENU. The
Playback Menu appears on the TV screen.
5 SELECT FUNCTION
Move the pointer and highlight bar to
"SYNCHRO" by rotating the Select Dial, then
press it. The value for "SYNCHRO" is high-
lighted.
6 INPUT CORRECTION DATA
Based on the diagnostics performed (
you can now increase the VCR's speed by
rotating the Select Dial upward. You can also
slow down the VCR's speed by rotating the
Select Dial downward. The adjustment range is
from –1.3 to +1.3 seconds, in 0.1-second
increments.
FULL SOUND 48kHz MODE
SOUND1 32kHz MODE
0 . 0 SYNCHRO
4
ON DISPLAY
OFF TIMECODE
END
FULL SOUND
SOUND1
0 . 0
ON
OFF
7
CLOSE MENU
Press the Select Dial twice.
•Now perform Random Assemble Editing
beginning with step 2 on page 60.
NOTES:
Before performing actual Random Assemble
Editing, do a few Random Assemble Editing trial
runs to check whether the value you have input is
appropriate or not, and make adjustments
accordingly.
Depending on the recorder, there may be
situations where the timing difference cannot be
pg. 63),
fully corrected.
EDITING
(Cont.)
Power Dial
Lock button
Select Dial
MENU
MENU button