JVC GR-DVX Instructions Manual page 71

SYMPTOM
19. The Picture Wipe and
Dissolve functions don't
work.
20. The Picture Wipe function
doesn't work.
21. Even when Slow (Slow
Shutter) isn't selected, the
image looks like it is
activated.
22. The Video Echo effect
doesn't work.
23. There is no strobe when
the Classic Film and
Strobe effects are
activated.
24. White Balance cannot be
activated.
POSSIBLE CAUSES
19. •The last selected editing
scene is ending.
•At the end of the last
selected scene for editing,
the Power Dial was set to
"OFF".
•The power is off.
20. •The Slow (Slow Shutter)
effect is activated.
•The Squeeze or Cinema
mode is selected in the
Recording Menu.
21. •When shooting in the dark
with GAIN UP set to A
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow (Slow
Shutter).
22. •The Picture Wipe or
Dissolve functions are in use.
•The Squeeze mode is
selected in the Recording
Menu.
•Snapshot Dissolve is in
progress.
•A Fade-In or Fade-Out is in
progress (White Fader, Black
Fader or Black & White
Fader).
23. •The Picture Wipe or
Dissolve functions are in
use.
•Snapshot Dissolve is in
progress.
24. •The Sepia or Monotone
effects are activated.
•Snapshot Dissolve is in
progress.
CORRECTIVE ACTION
19. •Select Picture Wipe or
Dissolve before beginning
recording. The effects are
then automatically
activated (
•Do not turn off the
camcorder's power after
setting Edit-In and Edit-Out
points, as they will all be
erased (
•The camcorder
automatically shuts off
after 5 minutes have
elapsed in the Record-
Standby mode. Make
sure you continue
operations within
5 minutes after engaging
Record-Standby mode
( pg. 40).
20. •Make sure the Squeeze
mode, Cinema mode, or
Slow effect is not activated
when preparing to use the
Picture Wipe function
( pg. 33, 45).
21. •If you want the lighting to
, look more natural, set
GAIN UP to "AGC" or
"OFF" in the Recording
Menu (
22. •Make sure the Squeeze
mode is set to "OFF"
( pg. 33).
•Do not try to use the Video
Echo effect during a
Fade-In or Fade-Out
( pg. 38).
23. •Do not try to use the
Classic Film or Strobe
effects during a scene
transition (
24. •Turn off Sepia or Monotone
before setting White
Balance (
•Wait until the Snapshot
Dissolve is finished before
setting White Balance
( pg. 27).
CONTINUED ON NEXT PAGE
71
EN
pg. 40).
pg. 40).
pg. 34).
pg. 45).
pg. 44).