JVC GR-DVX Instructions Manual page 36

36
EN
System Menu
The System Menu allows you to set the following functions: Photo Frame, Scene, Beep/Tally, Wind Cut,
Sound Mode and ID numbers.
Display
REC MODE
WIDE MODE
ZOOM
DIS
GAIN UP
FLASH
TO DATE / TIME MENU
4 TO SYSTEM MENU
END
Recording Menu
PHOTO FRAME
SCENE
BEEP / TALLY
WIND CUT
SOUND MODE
ID NUMBER
4 RETURN
System Menu
1 SELECT OPERATION MODE
First turn the Power Dial to "
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
ACCESS SYSTEM MENU
Move the pointer and highlight bar to "TO
SYSTEM MENU" by rotating the Select Dial,
then press it. The System Menu appears.
4
SELECT FUNCTION
Place the pointer and highlighlt bar to the
desired function by rotating the Select Dial,
then press it. The pointer stops blinking,
indicating that the function has been selected.
SP
OFF
20X
OFF
AGC
AUTO
ON
5S
ON
OFF
32kHz
06
" while pressing
M
RECORDING
MENU
MENU button
5 SET FUNCTION PARAMETERS
Rotate the Select Dial to cycle through the
available settings for the selected function, and
stop when the desired setting appears. Then
press it, and the pointer and highlight bar
automatically move to "RETURN".
•To set the parameters for a different function,
repeat steps 4 and 5.
6 CLOSE SYSTEM MENU
Press the Select Dial twice. Setting is complete
and the System Menu disappears.
Advanced Features (Cont.)
Lock button
Power Dial
Select Dial