JVC GR-DVP9 Instructions Manual page 55

.
Zoom Buttons
SHIFT
Left or SLOW
Rewind Button
Right or SLOW
Forward Button
Slow-Motion Playback
Allows slow-speed search in either direction during
video playback.
During normal video playback, press SLOW (YI or
IU) more than approx. 2 seconds.
After approx. 1 minute in Slow Rewind or
approx. 2 minutes in Slow Forward, normal
playback resumes.
To pause Slow-Motion playback, press PAUSE (9).
To stop Slow-Motion playback, press PLAY (U).
NOTES:
You can also engage Slow-Motion Playback from
Still Playback by pressing SLOW (YI or IU) more
than approx. 2 seconds.
During Slow-Motion Playback, due to digital
image processing, the picture may take on a
mosaic effect.
After SLOW (YI or IU) is pressed and held, the still
image may be displayed for a few seconds,
followed by a blue screen for a few seconds. This
is not a malfunction.
There may be a small margin between the slow-
motion playback start point you chose and the
actual start point for Slow-Motion Playback.
During Slow-Motion Playback, there will be
disturbances in video and the picture may seem
unstable, especially with steady images. This is not
a malfunction.
Frame-By-Frame Playback
Allows frame-by-frame search during video
playback.
During normal or still playback, press SLOW (IU)
repeatedly for forward or SLOW (YI) repeatedly for
reverse. Each time SLOW (YI or IU) is pressed, the
frame is played back.
Playback Zoom
Magnifies the recorded image up to 20X at any time
during video playback and D.S.C. playback.
1) Press PLAY (U) to start video
Up Button
playback. Or perform normal
playback of images.
Down Button
2) At the point you want to zoom
PLAY
in, press the Zoom Button (T).
PAUSE
STOP
3) You can move the image on the
screen around to find a particular
portion of the picture. While
holding down SHIFT, press L
(Left), F (Right), U (Up) and E
(Down).
NOTES:
Zoom can also be used during slow-motion and
still playback.
Due to digital image processing, the quality of the
image may suffer.
Playback Special Effects
Allows you to add creative effects to the video
playback image.
The effects that can be used during playback are
CLASSIC FILM, MONOTONE, SEPIA and STROBE.
The effects work the same in playback as they did in
recording. (
strobe effect.
films, your footage is shot in B/W. Used together
with the Cinema mode, it enhances the "classic
film" effect.
like old photos. Combine this with the Cinema
mode for a classic look.
consecutive snapshots.
1) To start playback, press PLAY (U).
2) Press EFFECT. The PLAYBACK EFFECT Select
Menu appears.
3) Press EFFECT repeatedly to move the highlight
bar to the desired effect.
To zoom out, press the Zoom
Button (W).
To end zoom, press and hold W until
magnification returns to normal. Or, press
STOP (8) and then press PLAY (U) during video
playback.
pg. 33)
CLASSIC FILM: Gives recorded scenes a
MONOTONE: Like classic black and white
SEPIA: Recorded scenes have a brownish tint
STROBE: Your recording looks like a series of
The selected function is activated and after
2 seconds the menu disappears.
To deactivate the selected effect, press EFFECT
ON/OFF. To reactivate the selected effect press
EFFECT ON/OFF again.
To change the selected effect, repeat from
step 2 above.
55
EN