Table of Contents
Advertisement
28
EN
Normal Playback Of Images
Images shot with the camcorder are automatically
numbered, then stored in numerical order in the
memory card. You can view the stored images, one
at a time, much like flipping through a photo album.
Stop Button (8)/
Rewind Button (
SELECT Button
(GR-DVM96 only)
Play/Pause Button (4/9)
MENU Wheel
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5
If the video clip playback (E-MAIL CLIP,
(
pg. 29)) or the digital sound playback
(SOUND, (
pg. 29)) screen appears, press
SELECT. The MEMORY SELECT screen appears.
6
Rotate the MENU Wheel to select "IMAGE", and
press it. The image playback screen (IMAGE)
appears.
7
Press 3 to display the previous file. Press 5
to display the next file.
Pressing INFO gives you details on the
displayed file. (
You can also look for the desired file using
Index Screen. (
You can turn off the on-screen playback
display. (
pg. 31)
NOTES:
Even if you shoot a new image after playing back a
low-numbered one, this will not overwrite an
existing image, because new images are
automatically stored after the last-recorded one.
)
3
Fast-Forward Button
(5)
VIDEO/MEMORY
Switch
Power Switch
OFF
Lock Button
pg. 17)
pg. 30)
pg. 30)
Images shot in a file size other than "640 x 480",
"1024 x 768" and "1280 x 960" (GR-DVM96
only) with another devices will be displayed
thumbnail images. These thumbnail images
cannot be transferred to a PC.
Images shot with devices (such as
JVC GR-DVM70) that are not compatible with
DCF cannot be viewed with this
camcorder; "UNSUPPORTED FILES" will be
displayed.
Auto Playback Of Images
You can run through all the images stored in
memory card automatically.
1
Perform steps 1 – 6 in "Normal Playback Of
Images".
2
Press 4/9 to start Auto Playback.
If you press 3 during Auto Playback, files
are displayed in descending order.
If you press 5 during Auto Playback, files
are displayed in ascending order.
3
To end Auto Playback, press 8.
[For Normal Playback]
To display the next image
Image playback screen
(IMAGE)
To display the previous
image
D.S.C. PLAYBACK
[For Auto Playback]
Advertisement
Chapters
Table of Contents
