JVC GR-DVL822U Instructions Manual page 33

Fast-Forward (3) Button
Rewind Button (2)
VIDEO/MEMORY Switch
(Open the LCD monitor to
access this switch.)
Display
DPOF Screen
DPOF
SHEETS
0 0
RETURN
DPOF
SHEETS
0 5
DPOF
SAVE?
EXECUTE
CANCEL
TO PRINT BY SELECTING STILL IMAGES AND
MENU/
BRIGHT Wheel
1
2
"CURRENT" and press it. Selection is complete. The
DPOF Screen appears.
3
print appears.
4
highlight bar to the SHEETS number indication and
press it.
5
BRIGHT wheel and press it.
Repeat steps 3 through 5 for the desired number of
prints.
• The number of prints can be set up to 15.
• To correct the number of prints, select the image
again and change the number.
6
"RETURN" and press it. Selection is complete.
"SAVE?" appears.
• If you did not change any settings in step 3 through
5, the Menu Screen reappears.
7
"EXECUTE", then press it to save the setting you
have just made.
• To cancel selection, rotate the MENU/BRIGHT
wheel to select "CANCEL" and press it.
To Reset The No. Of Prints . . .
..... select "RESET" in step 4 on pg. 32. The number
While performing the above, never disconnect power, as
this may cause the memory to be corrupted. For safety,
all buttons including the Power Switch are disabled in
step 6.
NOTES:
"BATTERY LOW" appears if the battery remaining
power is too low.
If you load a memory card already set as shown above
in a printer compatible with DPOF, it will make prints of
the selected still images automatically.
To print images recorded on a tape, first dub them to a
memory card (
NO. OF PRINTS
Perform steps 1 through 3 on pg. 32.
Rotate the MENU/BRIGHT wheel to select
Press 2 or 3 so that the image you wish to
Rotate the MENU/BRIGHT wheel to move the
Select the number of prints by rotating the MENU/
Rotate the MENU/BRIGHT wheel to select
Rotate the MENU/BRIGHT wheel to select
of prints is reset to 0 for all still images.
CAUTION
pg. 52).
33
EN