JVC GR-DVL822U Instructions Manual page 23

1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as shown
in the illustration (
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input, referring
to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen ( pg. 48).
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 48).
• Playback Sound Mode, Tape Speed And Tape
Running Displays for tape playback
..... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen ( pg. 48).
pg. 22).
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
To monitor the picture and sound from the camcorder
without inserting a tape or memory card, set the
camcorder's Power Switch to "
then set your TV to the appropriate input mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound when
the camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV
as interference will occur in the camcorder playback
picture.
If no image is displayed or no sound is heard from the
TV, set "S/AV INPUT" to "OFF" in the Menu Screen
( pg. 48).
While the Audio/Video cable is connected to the AV
connector, sound cannot be heard from the speaker.
23
EN
pg. 9).
" or " ",