Equipment Maintenance; Light Bulb Replacement; Control Panel Functions; Main Control Panel - champion spas 108 Owner's Manual

E q u i pm E n T m ai n T Enan CE
replacing the Spa's light bulb
The spa's light bulb is located inside the equipment compartment. Remove the front access
panel, by first removing the screws on the access panel . Then locate the light housing mounted
to the spa shell . Grasp the bulb holder on the back of the light niche . Turn bulb holder counter
clockwise to release it from the light niche . Pull bulb out of receptacle and replace it with a new
light bulb, available at your Champion Spas® dealer . Re-attach the light bulb holder to the light
niche by turning the light bulb holder clockwise .
Con T r ol panE l Fu n CT i on S
m a in Con Tr ol pa nE l
Champion Spas® models are equipped with a main control panel located on the top collar of
the spa. The main control panel controls all of the spa functions.
The panel/topside will indicate the operations of the hydro jet pump(s), spa light, and water
temperature and will display the spa's status regarding diagnostics, reminders and system
functions.
m a in ConT r o l pa nE l naVigaTi on
The main control panel includes navigation, setting functions and modes (time of day,
temperature, filter cycles, light and preferences) activate or deactivate the hydro jet pump(s),
sensor related messages, reminder messages and diagnostic messages as well as much more.
Navigating the entire menu can be accomplished with the TEMP and the LIGHT buttons.
From this point on, the "WARM" and "COOL" will be referred to as TEMP button. TEMP
buttons are "action" buttons (changing temperature, flashing screen for further prompts,
changing preferences within a menu). The LIGHT button is a "choose" button (LED Lights on
and off, enters menus when numbers are flashing, scrolls through the menu, makes a selection).
Waiting for 10 seconds will return the panel to normal operation and a display of spa status.
dual TEmpEraTurE ConTrol
This system incorporates Dual Temperature Range settings with independent set temperatures.
Your spa uses a HIGH RANGE (80*F – 104*F) or a LOW RANGE (55*F – 99*F)
temperature adjustment. The HIGH RANGE would be primarily for a ready to use mode
of your spa, while the LOW RANGE can be utilized for a vacation mode or during non-use
periods.
HIGH RANGE is indicated on the display as RANGE
Temperature adjustment
Press TEMP buttons (marked "Warm" or "Cold") for desired set temperature. The numbers flash
during the temperature adjustment. Press LIGHT to return to main menu; or, the main screen
will return in 5 seconds. If the panel has only one TEMP button, the first TEMP button press
causes the temperature to flash, the second TEMP press causes the temperature to change, then
pressing LIGHT or waiting five seconds will return you to the main menu.
14
C h a mp i o n Spa s ®
OWN E R 'S M A N UA L
, the LOW RANGE .