Alfa Romeo Giulietta Owner's Handbook Manual page 73

REGULATING THE FAN SPEED
Turn F knob to increase/decrease the fan speed. The speed is dis-
played by the G LEDs on the F knob.
❍ maximum fan speed = all LED lit up;
❍ minimum fan speed = one LED lit.
The fan can only be excluded if the climate control compressor
has been switched off by pressing B button.
IMPORTANT To restore automatic fan speed control after a manu-
al adjustment, press the AUTO button.
AUTO BUTTON
By pressing the AUTO button (LED on button lit) the climate con-
trol system automatically adjust the following settings in the cor-
responding zones:
❍ air quantity and distribution in the passenger compartment;
❍ climate control compressor;
❍ air recirculation
❍ cancelling any previous manual settings.
The LED on the AUTO button will light up to indicate that the func-
tion is on. By manually adjusting at least one of the functions au-
tomatically managed by the system (air recirculation, air distribu-
tion, fan speed or compressor on/off), the LED will go off, indi-
cating that the system is no longer automatically controlling all the
functions.
IMPORTANT If the system is unable to reach/maintain the required
temperature in the various areas of the passenger compartment,
the set temperature will flash for a few seconds.
To restore automatic system control after one or more manual
adjustments, press the AUTO button.
MONO BUTTON
Press the MONO button (LED on button lit) to align the air tem-
perature on passenger's side with that on driver's side.
This function makes temperature regulation easier when the driver
is travelling alone.
Turn L knob to set the temperature on passenger's side and go back
to separate air temperature management.
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
69