Replace the wheel as follows:
GETTING
❍ stop the car in a position so that it is not a danger for on-com-
TO KNOW
ing traffic and where you can replace the wheel safely. The
YOUR CAR
ground must be flat and solid;
❍ switch off the engine, pull up the handbrake and engage 1
gear or reverse; put on the high visibility jacket (required by
law) before leaving the car;
SAFETY
❍ open the boot, pull tab A-fig. 113 and lift up the mat;
❍ using the wrench A - fig. 114 positioned in the tool box, loosen
the locking device, take the tool box B and place it close to the
STARTING
wheel to be replaced, then take the space/saver wheel C;
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
164
fig. 113
❍ take tool A-fig. 115 and loosen the fastening bolts by ap-
proximately one turn. For versions with alloy rims, shake the
car to facilitate detachment of the rim from the wheel hub.
st
fig. 114
A0K0168m
fig. 115
A0K0124m
A0K0038m