TURNING THE SYSTEM ON/OFF MANUALLY
Press T fig. 82 on the dashboard to turn the system on and off
manually.
Turning the Start&Stop system on
A message will appear on the display when the Start&Stop system
is on. In this condition, LED A-fig. 82 located over button T is off.
Turning the Start&Stop on
❍ Versions with multifunction display: a message will appear on
the display when the Start&Stop system is off.
❍ Versions with reconfigurable multifunction display: symbol T
and a message will appear on the display when the Start&Stop
system is off.
LED A-fig. 82 is on when the system is off.
fig. 82
FAILED ENGINE CUT-OUT CONDITIONS
When the system is operating, due to comfort, emission control
and safety reasons, the engine does not stop in some conditions,
among which:
❍ engine still cold;
❍ very cold outside temperature;
❍ battery not sufficiently charged;
❍ heated rear windscreen on;
❍ windscreen wipers working at maximum speed;
❍ particulate filter regeneration in progress (diesel engines only);
❍ driver's door not shut;
❍ driver's seat belt not fastened
❍ reverse gear engaged (for example, for parking manoeuvres);
❍ for versions equipped with dual zone automatic climate control
system (for versions/markets, where provided), if an adequate
level of thermal comfort has not been reached or MAX-DEF func-
tion activation;
❍ during the first period of use, to initialize the system;
In these cases, a message is shown on the display and the sym-
bol U will blink (the latter for versions/markets, where provid-
ed).
If climate comfort is to be favoured, the
Start&Stop system can be disabled, for a contin-
uous operation of the climate control system.
A0K0121m
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
117
Need help?
Do you have a question about the Giulietta and is the answer not in the manual?