Alfa Romeo Giulietta Owner's Handbook Manual page 104

Electric window system initialisation
GETTING
The system must be re-initialised after disconnecting the battery
TO KNOW
or if the relevant protection fuse is blown.
YOUR CAR
Initialisation procedure:
❍ fully close the window manually to initialise;
❍ after the window has reached the upper end of travel, hold the
SAFETY
up button pressed for at least one second.
IMPORTANT For versions/markets where provided, following the
disconnection of the power supply (replacing or disconnecting the
STARTING
battery or replacing the protection fuse for the electric window con-
AND DRIVING
trol units), the automatic setting for the electric windows must be
reset.
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
100
The reset operation should be carried out with the doors closed
according to the following procedure:
1. completely lower the driver-side window and keep the button
pressed for at least 3 seconds once the end of travel position
has been reached (lower end stop);
2. completely raise the driver-side window and keep the button
pressed for at least 3 seconds once the end of travel position
has been reached (upper end stop);
3. repeat stages 1 and 2 also for the passenger's window
4. check that the initialisation has taken place correctly by check-
ing the automatic operation of the windows.