Mercedes-Benz GLK-Class Service Manual page 32

Interior
Rear bench seat
The rear seat backrest consists of a backrest frame
made of steel. This supports the foam padding inside
along with the selected seat covering with lining.
The rear bench seat is comprised of a body made of
rigid PEPP foam with an embedded wire frame and
additional foam pads.
The seat cover of the bench seat depends on the
equipment selected. The single-piece rear bench seat
is fixed in place but has an asymmetrically split rear
backrest which can be folded down quickly and easily
as required. This then acts as an almost level exten-
sion of the load compartment floor.
Rear seats
Introduction of the New GLK-Class (USA), Introduction into Service Manual for Model Series 204 v 31