Connecting To A Wired Internet Network Manually - Samsung UHD 9000 E-Manual

Connecting to a Wired Internet Network Manually

MENU Network
> >
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway, and DNS values manually to connect to the network. To get these values, contact your
Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
11
Network type
Set the
Network Settings
Select your network type.
Network type
21
Stop
Select when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Network Settings
Connection verification cancelled.
Wired network connection test is stopped.
Change Network
Network Settings
to Wired, and then select Connect.
Wired
Connect
IP Settings.
IP Settings
You can connect your
TV to the internet.
Retry Close